top of page

PIKA Indoor 

LoRaWAN Module

Installation Requirements for the Product Substrate and Powering Up

Screenshot 2024-08-16 at 15.12.42.png
Specifications

LoRaWan Module PIKA is an easy and intelligent device dedicated to collecting data from on-site Modbus RTU / Modbus TCP/ Pulse devices, and transmitting them to the Internet via LoRaWAN. It can read up to 50 Modbus register addresses on 8 Modbus devices with the same configuration. Besides, PIKA supports configuring warning trigger values which can immediately send a Lora packet when Modbus data is out of settings.

Wireless Transmission

  • Technology:LoRaWAN

  • Antenna:Internal Antenna or External Antenna

  • Frequency :EU433, CN470, IN865, EU868, AU915, US915, KR920, RU864, and AS923-1/2/3/4

  • Tx Power:16dBm (923 MHz) Sensitivity :-137 dBm

Modbus Interface

  • Modbus RTU

  • Port :1 x RS485

  • Baud Rate:1200~115200 bps

  • Modbus TCP/IP

  • Port :1x RJ45 (Option)

Data Configuration

  • Port:1x Type C

  • Tool :PIKA PC Software

Pulse input

  • Port :Terminal Block 3.81mm

Others

  • Reset Button Internal

  • User Button

  • LED Indicator

  • Lora antenna

Physical Characteristics

  • Power Connector : Terminal Block 3.81mm

  • Power Supply :1. 6-24 VDC Terminal Block, 2. 5 VDC by type-C Port

  • Power Consumption :< 0.5W

  • Material & Color :PC+ABS, White

  • Ingress Protection:IP54

  • Operating Temperature :-20°C ~ 60°C (-4°F to +140°F)

  • Relative Humidity :0% ~ 95% (non-condensing)

  • Dimensions :124*67*34 mm

  • Installation:Wall Mounting

PIKA Software Features

PIKA device communication COM port setting (Serial port, Baud rate, Data bits, Parity bits, Stop bits).

Status

  • Model

  • Serial Number

  • Hardware version

  • Firmware version

  • LoRaWAN Enable

  • Device EUI

  • Join Mode

  • Join Status

  • Class

  • Regional Band

  • RSSI/SNR

  • Uplink Frame Counter

  • Report interval

  • Modbus TCP/IP

LoRaWAN setting

  • Enable / Disable LoRaWAN.

  • Regional Band (EU433, CN470, IN865, EU868, AU915, US915, KR920, RU864, and AS923-1/2/3/4) Default AS923-2.

  • Class (A, C).

  • Join Mode (OTAA/ABP)

  • Device EUI

  • Application EUI

  • Application Keys

  • Network ID

  • Device Address

  • Network Session Key

  • Application Session Key

  • Application Port

  • Frame Counter Up

  • Transmit Power

  • RX2 Frequency (Hz)

  • RX2 Data Rate

  • Adaptive Data Rate (ADR)

  • Data Rate

  • Confirm Mode

  • Send Retry

Modbus setting

  • Switch between Modbus RTU and Modbus TCP connection.

  • Import/Export CSV file.

  • Settings Modbus

  • Polling up to 8 slave ID.

  • Configuring up to 50 data fields.

  • Data field name, Offset address, Register address, Function code (03/04), Length, Data type (sign, unsign, INT16, INT32, INT64, float32, double64), Warning Type (warning with, warning without, warning range), Warning Value, 4 bytes data order, 8 bytes data order.

  •  Poll data.

Modbus RTU setting

  • Baud rate (1200,2400,4800,9600,19200,38400,57600,115200)

  • Data bits (8,9)

  • Parity bits (None, Odd, Even)

  • Stop bits (0,1)

  • Execution interval (min)

  • Response Timeout (ms)

  • Delay Between Poll (ms)

  • Maximum Retry Times

  • Base Address (0,1)

  • Slave ID

Modbus TCP/IP setting

  • IP address

  • MAC Address

  • Subnet Mask

  • Gateway Address

  • Port (502)

  • Connection timeout

Pulse setting

  • Number of Cubic Meter Digits

  • Number of Liters Digits

  • Set New Value

  • Pulse/M3

  • Noise Filter

Basic setting

  • Device ID.

  • LoraWan reporting interval.

Downlink Command

  • Change reporting interval.

  • Set Pulse Value.

  • Send Report ( Class C).

Enable / Disable showing serial port logging.

bottom of page